Task 1: Make a LAN Cable using RS 232. (Procedure)
Task 2: Identify differences between Switches and Hubs.
Task 3 : Which OSI layer is the following? Router, Hub, Switch
Task 4 : What is a Transmission media? List the difference between Straight and Crossover
Cables.
Lab 2: show ip address commands, ping and tracert
Lab 3: design a network with four pc's and hub ,check connectivity of all pc's with each other, make it in proper presentable form And write ARP table of above network showing ICMP and ARP requests.
Lab 4: Create a logical network diagram with four PCs and a switch. Ping the PCs to check the network connection. Allocate Dynamic Allocation using a Server.
Lab 5: Basic Configuration of Router R1,Configure the EXEC mode password. Configure the console password on the router. Configure the password for the virtual terminal lines. Configure the FastEthernet0/0 interface. Configure the Serial0/0/0 interface. Save the R1 configuration.
Lab 6:make a network with Router , note the ARP tables of devices and OSI model Layers (Source to destination)
Lab 7: Design and configure a LAN with two different IP address classes (Class A and Class C or B) and connect them using a router to allow inter-network communication.
Lab 8:Implement RIP configuration on a network for R1 and R2
Lab 9: implement OSPF routing protocol.
Lab 10: Domain Name Server Implementation.
Lab 11: DHCP configuration using router and server
0 Comments